700R4 / 4L60 No Core - Free Shipping

›Interior Replacement

›USM Policy

›Newsletter

›Employment

›Shipping Rate

›International

›Helpful Links

›Help

Online Payments

Home > Transmissions > 700R4 / 4L60

700R4 / 4L60 No Core - Free Shipping

USM# PB0001-2

Price

Your Price:

$0.00

Choose Options and Quantity

Send to:
or add name:
We'll ask for shipping info at checkout

Quantity

Description

LEVEL 1- Pro Street 700R4, 4L60E, 4L65E, 4L70E

Below are the details of our Pro Street (LEVEL 1) built Transmission, which is suitable for applications up to 500HP.

First, each core transmission is disassembled and carefully inspected. The case and hard parts are then cleaned thoroughly and re-inspected for cracks, wear, or other damage before we begin. The case is specially prepared, and a coating of and heavy duty, heat resistant, oil based enamel is baked on, creating a hard and durable glossy finish. The seals in the case are replaced and assembly begins.

The rear planetary assembly and bearings are meticulously inspected and assembled into case along with Allomatic reverse frictions and steels. At this time the center support and sprags (one way rollers) are installed after being inspected for stress cracks and damage. Also a special anti clunk device is installed to replace the OEM spring. This prevents the support from tearing through lugs in the case and reinforces the case.

Next the sun gear is inspected and four slots are machined into the bottom. This improves lubrication to the rear planetary assembly by allowing oil to escape from between the bearing and the gear it rests against which feeds additional lube to the planetary gears. This is a huge improvement, and it virtually eliminates one of the most common points of failure for this type of transmission. In fact, contrary to common opinion, the rear planetary assembly in these transmissions is not in any way weak by design. Their failure is almost exclusively due to a lack of lubrication. When you see one with a damaged rear planetary, it will almost always be accompanied by the blue-black signs of excessive heat. Simply put, the planetary assemblies with good lube DO NOT FAIL even in the most demanding environments.

We then replace the sun shell with a new heavy duty unit, which far exceeds the factory component, and is able to withstand the rigors or either the street or the strip.

Next, we re-inspect the front planetary assembles - measuring clearances and making sure everything is within our own rigid specifications before installing it and inserting the output shaft and new retaining clip. The front sun gear is then slotted for improved lubrication, as the rear sun gear was, and installed. Then end play is set for the output shaft.

Now for the input drum. We re-inspect it before installing new rubber seals and a neoprene lubrication seal. Next, we install new Alto overrun frictions, a late heavy duty forward sprag assembly, and composite forward frictions. These forward frictions have a superior holding capability, as well as improved ability to withstand extreme heat, when compared with the OEM frictions. Since these frictions must hold the power of your vehicle in every forward gear, they have to be tough enough for the job. Finally, we replace the 3-4 frictions set with a 9 friction Alto set. This section is usually considered the weak link within these transmissions, but with this upgrade, durability is improved by 30 percent over the stock 5 or 6 friction set.

As we move on to the reverse input drum, it is assembled, seals replaced, and the band surface area resurfaced to accept the Max duty wide performance 2-4 band. This band has approximately 20 percent more surface area for holding in both second and fourth gears. This stronger 2-4 band will hold the torque during that tire chirping shift into second at full throttle in your performance machine.

We also install the corvette servo for maximum "apply pressure" in second gear. This is the largest GM offering and is plenty for most applications.

Now we move on to the pump. It is inspected and modified to provide maximum lube to the planetary sets. We install a boost valve suitable for the application. The vanes in the pump are carefully inspected for wear and replaced as needed, steel pump rings are installed. The pump bushing is replaced with a Teflon bushing, and notches are made in pump surface to prevent its movement in even the most demanding high RPM or towing situations. This effectively eliminates front seal blow out. In addition, the front seal is installed with a special adhesive and seal retainer to eliminate any possibility of ever having a problem. The pump is the heart and soul of any automatic transmission, and we make sure it's a healthy one.

The last section is the valve body. For this we use all we have learned over the years. What we have learned is, although most shift kits have certain distinct advantages, no one kit has all the best modifications.. some parts we liked others we didn't. We took the best parts of each, and utilizing our own experience, created a set of modifications that is superior to all the others. We do not block accumulators, since the reason they exist is to prevent excessive shock to the transmission and drive train. With our transmissions, you will always have a solid, firm shift that will be linearly progressive. That means at light throttle you will feel a nice bump, letting you know the car or truck has shifted. As throttle is increased, the shifts will become more pronounced to the point of tire chirping in high performance vehicles or a firm shift at full throttle in a towing/hauling situation. It will not cause whiplash just cruising with your significant other or your grandmother around town, but will turn heads when laying it on the line.

We also eliminate the partial lockup function GM mistakenly engineered into the 4L60E transmission, thus eliminating converter shudder, premature converter clutch failure, and the well known code 1870, which causes high "line pressure", no fourth gear, and teeth cracking shifts at low throttle. Lockup is either OFF or ON, not slipping off and on as it did with the factory PWM working. This does not affect performance, but it does have the added advantage of increasing low speed fuel efficiency, which at today's fuel prices is like getting a bonus.

Level 2 - Pro Race 700R4, 4L60E, 4L65E, 4L70E

Below are the details of our Pro Race (LEVEL-2) built transmission.

First, each core transmission is disassembled and carefully inspected. The case and hard parts are cleaned thoroughly and re-inspected for cracks, wear, or other damage before we begin. The case is specially prepared, and a coating of and heavy duty, heat resistant, oil based enamel is baked on, creating a hard and durable glossy finish. The seals in the case are then replaced and assembly begins.

The rear planetary assembly and bearings are meticulously inspected, then assembled into the case along with Allomatic reverse frictions and steels. At this time the center support and sprag (one way roller) are installed after being inspected for stress cracks and damage. Also a special anti clunk/case reinforcement device is installed to replace the OEM spring. This prevents the support from tearing through lugs in the case and reinforces the case.

Next the sun gear is inspected and four slots are machined into the bottom. This improves lubrication to the rear planetary assembly by allowing oil to escape from between the bearing the gear it rests against, feeding additional lube to the planetary gears. This is a huge improvement, and virtually eliminates one of the most common points of failure for this type of transmission. In fact, contrary to common opinion, the rear planetary assembly in these is not in any way weak by design. Their failure is almost exclusively due to a lack of lubrication. When you see one of there with a damaged rear planetary, it will almost always be accompanied by the blue-black signs of excessive heat. Simply put, these planetary assemblies with good lube DO NOT EASILY FAIL, even in the most demanding environments.

We then replace the sun shell with a new heavy duty unit called (and deservedly so) THE BEAST, which far exceeds the factory component. THE BEAST is able to withstand the rigors of the street, the strip, or the mud, whichever is your pleasure. No matter how hard you beat on it, THIS SHELL DOES NOT BREAK!

Next, we re-inspect the front planetary assembles measuring clearances and making sure everything is within our own rigid specifications before installing it and inserting the output shaft and new retaining clip.

The front sun gear is then slotted for improved lubrication, as the rear sun gear was, and installed. Then end play is set for the output shaft.

Now for the input drum. We re-inspect it before installing new rubber seals and a neoprene lubrication seal. Next, we install new Alto overrun frictions,A BORG WARNER DUAL CAGE INPUT SPRAG ASSEMBLY and composite forward frictions. These forward frictions have a superior holding capability, as well as improved ability to withstand extreme heat, when compared with the OEM frictions. Since these frictions must hold the power of your vehicle in every forward gear, they have to be tough enough for the job.

Finally, we replace the 3-4 clutch set with the Raybestos Z-pack. This clutch set has proven its durability to us over the years. It will take the heat and hold in even the most severe situations.

As we move on to the reverse input drum, it is assembled, the seals replaced, and the band surface area resurfaced to accept the Max duty performance wide band. This band has approximately 20 percent more surface area for holding in both second and fourth gears. This stronger 2-4 band will hold the torque during that tire chirping shift into second at full throttle in your performance machine.

We also install the *FAIRBANKS SUPER SERVO* for maximum "apply pressure" in second gear, and the Sonnax twin piston super servo for overdrive, providing an additional 30 percent holding ability in 4th gear.

Now we move on to the pump. It is inspected and modified to provide maximum lube to the planetary sets. We install a large boost valve suitable for the application. The vanes in the pump are carefully inspected for wear and replaced as needed, steel pump rings are installed. The pump bushing is replaced with a Teflon bushing, and notches are made in pump surface to prevent its movement in even the most demanding high RPM or towing situations. This effectively eliminates front seal blow out. In addition, the front seal is installed with a special adhesive and seal retainer to eliminate any possibility of ever having a problem. The pump is the heart and soul of any automatic transmission, and we make sure it's a healthy one.

We also eliminate the partial lockup function GM mistakenly engineered into the transmission, thus eliminating converter shudder, premature converter clutch failure, and the well known code 1870, which causes high "line pressure", no fourth gear, and teeth cracking shifts at low throttle. Lockup is either OFF or ON, not slipping off and on as it did with the factory PWM working. This does not affect performance, but it does have the added advantage of increasing low speed fuel efficiency, which at today's fuel prices is like getting a bonus.

LEVEL 3 - INVINCIBLE 700R4, 4L60E, 4L65E, 4L70E

Our INVINCIBLE series is our Extreme offering in the 4L60 transmissions series. It’s available in the 700R4, 4L60E for LT-1, 4L60E for LS1 / LSX and 4L65E.
It features all the components of our Level 2 (Pro Race) transmissions with these upgrades for added Strength and Durability. (Nothing but the best):
- Modified Reinforced OEM style five (5) pinion planetaries with a grooved sun gear for improved lubrication.

- Specially prepared performance input drum assembly.

- Molded seal steel pistons.

- Raybestos High Performance forward frictions.
- A set of 8 RAYBESTOS STAGE 1 PERFORMANCE clutches with full thickness steels for High Impact Durability and Super Hold on the 2-3 shift.

- Borg Warner 29 element dual cage sprag assembly, the strongest available
- The BEAST sun shell, considered unbreakable and will withstand the abuse levied in high horsepower extreme torque situations
- Ultra wide carbon composite 2-4 performance band with reinforced pin area to prevent tear through. This band will take the abuse and the heat.
- Superior/Fairbanks Super Servo for maximum second gear hold (It also limits 3rd gear 3-4 clutch accumulation to aid in the 3-4 clutch apply)
Sonnax Dual Piston Overdrive Servo (with the wide band to stand WOT overdrive if your PCM is set up to allow it)
- A Thirteen (13) vane pump with hardened rings and a full-time lube modification which assures maximum planetary life and cooling
(Deep pan not available on the 700r4 unit)

Note: There is a $150 cancellation fee/processing for any order canceled before unit is shipped. No exceptions.

Review this item

Email this page to a friend

USM - Ultimate Street Machines, when you buy your new parts from USMRACER, you'll save up to 25% or more over dealer prices. We have Engine, Transmissions, Driveline, Suspension, Steering, Brakes, Instrumentation & Electronics, Body & Exterior trim & Glass, Chassis electrical, Interior Trim & Seating, HVAC, Wheels & Tires, Lubricants & Fluids. We also have an extensive listing of OEM & restoration parts. We have thousands of parts in inventory that are not displayed here. You can give our Sales reps a call for assistance.