| 1984-89 Corvette Dash Cluster LED Upgrade
Although the C4 Digital Dash is an impressive technological device it does have a few weak points. One of those weaknesses is the illumination of the cluster. From 1984-1988 Halogen bulbs were used until the Xenon filled bulbs replaced them. Known for their intense brightness, which is necessary in this application, the Halogen bulbs were very hot, sometimes even melting dash components and burning the bulb socket. These bulbs drew a lot of electrical current which put even more demand on the dash cluster's already taxed power supply. Also, the life expectancy of halogen bulbs is only about 1500 hours.
To provide a superior alternative to the stock bulb options, we are proud to offer our TrueColor LED Upgrade. Our bulbs are purpose built for this application. These units pull 1/30th of the power of the stock bulbs. Furthermore, these LED bulbs are much cooler then the halogen, which can be a few hundred degrees. Electronics and heat do not mix, so our LED bulbs will not only prolong the life of your electrical system by pulling less current, but will extend vital dash components with a cooler operational environment. Additionally, these bulbs can be expected to last around 50,000 hours of operation. This is 30 times longer than the stock bulbs.
The Dash Cluster LED Set is a great enhancement for the stock dash. The stock colors are brighter even in daytime. When used with our Dash Lens Upgrade the effect is truly great as the colors are truer and the even the darker colors are much brighter.
Benefits of Dash Cluster LED Set:
- Cooler operation temps extends dash components
- Brighter in Daytime
- Uses less electric
- Bulb lasts much longer, about 50,000 hours
- Completely reversible
- You can do it yourself
Product Includes: 4 bulbs, 4 sockets and Instructions (Does not include Dash Lens Upgrade. To order Dash Lens Upgrade for 1985-89 kit order number U9KIT and for 1984 kit order number U9AKIT). Please see our video of the TrueColor Dash Cluster Upgrade Kit with LED Bulbs and you will see the difference our new LEDS can make.
*** Please Note: Some circuit board bulb holes are damaged from over powering the bulb socket during installation. Be careful not to over twist the socket. Doing so can cause the socket contacts to ride past the circuit board contacts causing poor contact and/or damaged to the circuit board.
|